Prelude Type-SH L4-2156cc 2.2L DOHC (VTEC) MFI (1997)
_mfi/Page-1839001.png)
Brush Holder: Testing and Inspection
Starter Brush Holder Test
1. Check that there is no continuity between the (+) and (-) brush holders.
If there is continuity, replace the brush holder assembly.
2. Insert the brush into the brush holder, and bring the brush into contact with the commutator, then attach a spring scale to the spring. Measure the
spring tension at the moment the spring lifts off the brush.
Spring Tension
