Prelude Type-SH L4-2157cc 2.2L DOHC H22A4 (VTEC) 16V (1998)
Sun Shade: Service and Repair
Glass Stay, Slider, Lifter, Guide RaiI5, Cable Assembly, and Sunshade Removal/Installation
CAUTION: Wear gloves to remove and install the glass stay, slider, lifter, guide rails, cable assembly, and sunshade.
1. Remove the frame.
2. Remove the motor.
3. Remove the drain channel.
NOTE: Take care not to twist or lift up on the seals.
4. Remove the front drain channel on each side.
5. Remove the two screws and one nut securing each guide rail, then lift and remove both guide rails with the cable assembly. Remove the sunshade.