Prelude Type-SH L4-2157cc 2.2L DOHC H22A4 (VTEC) 16V (1998)
7. Separate the glass stay, slider, lifter and slide stop link.
8. Remove the anchor rod, anchor spring and sunshade rail from the guide rail.
NOTE: When removing the anchor rod, turn the hook of the anchor rod with a flat tip screwdriver.
9. Installation is the reverse of the removal procedure.
NOTE:
-
Damaged parts should be replaced.
-
Apply multipurpose grease to each location indicated by the arrows throughout each step.
-
Apply caulking to the guide rail mounting surface of the frame shown in step 5.