Prelude Type-SH L4-2157cc 2.2L DOHC H22A4 (VTEC) 16V (1998)
Brake Pad: Service and Repair
Rear
WARNING:
-
Never use an air hose or dry brush to clean brake assemblies.
-
Use an OSHA-approved vacuum cleaner to avoid breathing brake dust.
-
Block the front wheels before jacking up the rear of the vehicle.
1. Block the front wheels, loosen the rear wheel nuts slightly, support the rear of vehicle on safety stands, then remove the rear wheels.
2. Release the parking brake.
3. Remove the rear caliper protector.
4. Hold the caliper pins with a thin, open-end wrench, and remove the two caliper bolts and the caliper from the bracket.
CAUTION:
-
Thoroughly clean the outside of the caliper to prevent dust and dirt from entering inside.
-
Support the caliper with a piece of wire so that it does not hang from the brake hose.