Prelude Type-SH L4-2157cc 2.2L DOHC H22A4 (VTEC) 16V (1998)
_16v/Page-1892001.png)
Blower Motor: Service and Repair
Removal and Installation
1. Remove the evaporator.
2. Disconnect the connectors from the recirculation control motor, the blower resistor and the blower motor, then remove the wire harness clips from
the blower unit. Remove the mounting bolt, mounting nuts and the blower unit.
3. Install in the reverse order of removal. Make sure that there is no air leakage.
