Prelude Type-SH L4-2157cc 2.2L DOHC H22A4 (VTEC) 16V (1998)
Skill level:
Repair Technician
Out of warranty: Any repair performed after warranty expiration may be eligible for goodwill consideration by the District Service Manager or your
Zone Office. You must request consideration, and get a decision, before starting work.
REPAIR PROCEDURE
1.
Measure the clearance between the A/C suction line foam cover and the radiator hose support bracket.
^
If the clearance is 6 mm or more, no repair is necessary.
^
If the clearance is less than 6 mm, continue to step 2.
2.
Inspect the A/C suction line for a hole where the radiator hose support bracket has rubbed.
^
If the A/C suction line is damaged, continue to step 3.
^
If the A/C suction line is not damaged, go to step 11.
3.
Use an R-134a recovery/recycling station to remove any remaining refrigerant from the system.
4.
Remove the A/C suction line.
5.
Install the new A/C suction line. Torque the nuts to 31 Nm (23 lb-ft).
6.
Remove the receiver/dryer.
7.
Install the new receiver/dryer. Torque the nuts to 13 Nm (9.4 lb-ft).
8.
Evacuate the system. Follow the recovery/recycling station manufacturer's instructions.
9.
Charge the system with 700-750 grams (24.7-26.5 oz) of R-134a refrigerant. Add 20 ml of PAG oil.
10.
Use a R-134a refrigerant leak detector to check for leaks.