Prelude Type-SH L4-2157cc 2.2L DOHC H22A4 (VTEC) 16V (1998)
_16v/Page-402006.png)
11. Remove the stopper.
12. Install the timing balancer belt drive pulley and lower cover.
13. Install the crankshaft pulley, then tighten the pulley bolt.
14. Rotate the crankshaft pulley about five or six turns counterclockwise so that the timing belt positions on the pulleys.
15. Make sure the crankshaft and camshaft pulleys are at TDC.
16. If either the camshaft or the crankshaft pulley is not positioned at TDC, remove the timing belt and adjust the positioning, then reinstall the timing
belt.
17. Set the crankshaft pulley so that the No. 1 piston is at TDC.
18. Remove the crankshaft pulley and lower cover.
19. Loosen the adjusting nut 2/3-1 turn, and verify that the timing balancer belt adjuster moves freely.
20. Retighten the adjusting nut.
