Prelude Type-SH L4-2157cc 2.2L DOHC H22A4 (VTEC) 16V (1998)
Seat Belt: Service and Repair
Rear Seat Belt
CAUTION: Check the rear seat belts for damage. and replace them if necessary. Be careful not to damage them during removal and installation.
1. Remove:
-
Door sill molding
-
Roar pillar trim
-
Roar seat-back and rear seat cushion
-
Rear bulkhead upper trim
-
Door trim (as necessary)
-
Quarter trim panel
Rear Seat
2. Detach the seat belt guide. Remove the upper and lower anchor bolts, the retractor bolt, the retractor mounting bolt, and remove the rear seat belt
and retractor.
3. Installation is the reverse of the removal procedure.
Upper Anchor Bolt Construction / Rear Seat