Prelude Type-SH L4-2157cc 2.2L DOHC H22A4 (VTEC) 16V (1998)
10. Disconnect the pump outlet hose and return line from the valve body unit on the steering gearbox.
CAUTION: After disconnecting the lines, plug or seal the lines fitting with a piece of tape or equivalent to prevent foreign materials from
entering the valve body unit.
NOTE: Do not loosen the cylinder lines A and B between the valve body unit and cylinder.
11. Remove the exhaust pipe A.
12. Disconnect the shift linkage.
13. Remove the stiffener plates first, then remove the mounting brackets and mounting cushion.
14. Move the steering gearbox to the right so the left tie-rod end clears the rear beam, then move the steering gearbox to the left, and tilt the left side
down to remove it from the vehicle.