Prelude Type-SH L4-2157cc 2.2L DOHC H22A4 (VTEC) 16V (1998)
Steering Angle Sensor: Service and Repair
Replacement
CAUTION: Handle the steering angle sensor with care; it is sensitive.
1. Remove the combination switch.
2. Remove the circlip and screw, then remove the steering angle sensor from the combination switch.
3. Installation is in the reverse order of removal.
CAUTION: Do not apply any grease or oil to the steering angle sensor.
4. After installation, memorize the new neutral position for the steering angle sensor in the ATTS control unit.