Prelude Type-SH L4-2157cc 2.2L DOHC H22A4 (VTEC) 16V (1998)
_16v/Page-1841008.png)
CAUTION: Torque the castle nut to the lower torque specification, then tighten it only far enough to align the slot with the pin hole. Do not align
the nut by loosening.
5. Tighten the flange bolt.
6. Tighten the flange bolt with a new self-locking nut.
7. Tighten the three damper flange nuts.
8. Check the front wheel alignment, and adjust if necessary.
