Prelude Type-SH L4-2157cc 2.2L DOHC H22A4 (VTEC) 16V (1998)
Case: Service and Repair
Transmission Housing Removal
TOOLS REQUIRED
-
07HAC-PK40102 Housing Puller
-
Or Equivalent
NOTE:
-
Clean all parts thoroughly in solvent or carburetor cleaner, and dry with compressed air.
-
Blow out all passages.
-
When removing the transmission housing, replace the following
-
Transmission housing gasket
-
A/T clutch pressure control solenoid valve gasket
-
Lock washer
-
O-rings
1. Remove the A/T clutch pressure control solenoid valve A/B assembly.
2. Remove the countershaft speed sensor.
3. Remove the transmission housing mounting bolts (fifteen bolts), hangers, and brackets.