Prelude Type-SH L4-2157cc 2.2L DOHC H22A4 (VTEC) 16V (1998)
_16v/Page-1262003.png)
NOTE: If the top arm of your housing puller is too short, replace it with Housing Puller Arm, 205 mm, 07SAC - POZ0101.
8. Remove the reverse idler gear from the transmission housing.
9. Remove the countershaft 2nd gear, then slide and remove the countershaft reverse gear and the needle bearing.
10. Remove the bolt securing the shift fork, then remove the shift fork, reverse selector, reverse selector hub, and countershaft 4th gear.
11. Remove the secondary shaft sub-assembly.
12. Remove the mainshaft sub-assembly.
13. Remove the countershaft sub-assembly.
14. Remove the differential assembly.
