Prelude Type-SH L4-2157cc 2.2L DOHC H22A4 (VTEC) 16V (1998)
6. Remove the snap ring. Then remove the special tools, spring retainer, and return spring.
7. For 3rd and 4th clutch: Wrap a shop rag around the clutch drum, and apply air pressure to the fluid passage to remove the piston. Place a finger tip
on the other end while applying air pressure.
ASSEMBLE
NOTE:
-
Clean all parts thoroughly in solvent or carburetor cleaner, and dry them with compressed air.
-
Blow out all passages.
-
Lubricate all parts with ATF before assembly.