Prelude Type-SH L4-2157cc 2.2L DOHC H22A4 (VTEC) 16V (1998)
_16v/Page-1269010.png)
7. Install the snap ring.
8. Remove the special tools.
9. Install the disc spring in the 3rd, and 4th clutches in the direction shown.
10. Install the waved washer spring in the 1st clutch.
11. Soak the clutch discs thoroughly in ATF for a minimum of 30 minutes.
12. Starting with a clutch plate, alternately install the clutch plates and discs. Install the clutch end plate with the flat side toward the disc.
