Prelude Type-SH L4-2157cc 2.2L DOHC H22A4 (VTEC) 16V (1998)
4. Seat the external circlip in the groove of the intermediate shaft.
5. Press the outer seal into the bearing support using the special tools and a press.
CAUTION: Do not damage the lip on outer seal during installation.
NOTE: Press the seal flush with the bearing support.
6. Install the new set ring in the intermediate shaft groove.
INSTALLATION
1. Insert the intermediate shaft assembly into the differential.
CAUTION: Hold the intermediate shaft horizontal to prevent damage to the differential oil seal.
2. Install the flange bolt and dowel bolts, then tighten them.