Prelude Type-SH L4-2157cc 2.2L DOHC H22A4 (VTEC) 16V (1998)
4. Measure the clearance between the 2nd gear and 3rd gear.
-
Standard: 0.10 - 0.15 mm (0.004 - 0.006 inch).
-
Service Limit: 0.18 mm (0.007 inch)
5. If the clearance is more than the service limit, measure the thickness of the spacer.
-
Standard: 29.07 - 29.09 mm (1.144 - 1.145 inch)
6. If the thickness is less than the standard, replace the spacer with a new one. If the thickness is within the standard, measure the thickness of the 2nd
gear.
-
Standard: 28.92-28.97 mm (1.139 - 1.141 inch).
-
If the thickness of 2nd gear is less than the standard, replace 2nd gear with a new one.
-
If the thickness of 1st gear is within the standard, replace 1st/2nd synchro hub with a new one.