Prelude Type-SH L4-2157cc 2.2L DOHC H22A4 (VTEC) 16V (1998)
C: Inspect the synchro sleeve teeth and matching teeth on the gear for wear (rounded off).
D: Inspect the gear hub thrust surface for wear.
E: Inspect the cone surface for wear and roughness.
F: Inspect the teeth on all gears for uneven wear, scoring, galling, and cracks.
G: Install each synchro hub in its mating synchro sleeve, and check for freedom of movement.
NOTE: If replacement is required, always replace the synchro sleeve and synchro hub as a set.