Prelude Type-SH L4-2157cc 2.2L DOHC H22A4 (VTEC) 16V (1998)
_16v/Page-1459002.png)
4. Remove the ball bearing and the stop ring using a bearing separator and a bearing puller. Be sure the bearing separator is under the stop ring.
CAUTION: Remove the synchro hubs using a press and steel blocks as shown. Use of a jaw-type puller can cause damage to the gear teeth.
5. Support 5th gear on steel blocks, and press the mainshaft out of the 5th synchro hub.
