Prelude Type-SH L4-2157cc 2.2L DOHC H22A4 (VTEC) 16V (1998)
_16v/Page-2564001.png)
Windshield Washer Switch: Testing and Inspection
1. Remove the dashboard lower cover.
2. Disconnect the combination switch harness 10P and 5P connector from the main wire harness, and disconnect the 20P connector from the
under-dash fuse relay box.
3. Check for continuity between the terminals in each switch position according to the table.
^
If there is continuity, the switch is OK.
^
If there is no continuity, check for continuity between the switch harnesses.
-
If the switch harness is OK, replace the wiper/washer switch.