honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Front Door Exterior Handle|Service and Repair|Page 7482 > < Cowl Moulding / Trim|Service and Repair|Page 7474
Page 1
background image

Front Door Exterior Handle: Service and Repair

Front Door Outer Handle Replacement

NOTE:  Put on gloves to protect your hands.

1. Raise the glass fully.
2. Remove these items:

-

Door panel

-

Plastic cover, as necessary

-

Center lower channel (driver's side only)

3. Remove the maintenance seal (A) from the rear of the door, then disconnect the outer handle rod (B) and cylinder rod (C) (driver's).

4. Driver's; Release the retainer clip (A) with a hook-shaped tool, then remove the lock cylinder (B).

5. With cylinder switch: Disconnect the cylinder switch connector (A), and detach the harness clips (B), then remove the cylinder switch (C).

Front Door Exterior Handle|Service and Repair|Page 7482 > < Cowl Moulding / Trim|Service and Repair|Page 7474