Ridgeline V6-3.5L (2006)
4. Remove the carpet (A).
1. Remove the clips.
2. Pull back the rear passenger's area of the carpet.
3. Pull back the carpet from under the dashboard.
4. Pull both seat wire harnesses (B) out through the slit in the carpet.
5. If necessary, remove the screw, then remove the tie-down hook (A) from each side.
6. Install the carpet in the reverse order of removal, and note these item8:
-
Take care not to damage, wrinkle or twist the carpet.
-
Replace any damaged clips.
-
Slip the seat harnesses through the slit in the carpet correctly.
-
Push the clips into place securely.
