Ridgeline V6-3.5L (2006)
4. Remove the pad shims (A) and brake pads (B).
5. Remove the pad retainers (A).
6. Clean the caliper thoroughly; remove any rust, and check for grooves and cracks.
7. Check the brake disc for damage and cracks.
8. Clean and install the pad retainers.
9. Apply Molykote M-77 assembly paste (P/N 08798-9010) to the pad side of inner shim A, outer pad shim, B, and outer pad shim C, the back of the
brake pads (D), and the other areas indicated by the arrows. Wipe excess assembly paste off the shims and brake pads. Contaminated brake discs
or brake pads reduce stopping ability. Keep grease and assembly paste off the brake discs and brake pads.
10. Install the brake pads and pad shims correctly. Install the brake pad with the wear indicator (E) on the upper inside.
If you are reusing the brake pads, always reinstall the brake pads in their original positions to prevent a momentary loss of braking efficiency.
