Ridgeline V6-3.5L (2006)
Apply silicon grease to movable joints,
Shift Lever Bracket Assembly Replacement
Shift Lever Bracket Assembly Replacement
1. Remove the shift lever assembly.
2. Remove the harness clamps from the shift lever bracket, and remove the harnesses from the harness clamps.
3. Pry up the lock covers (A) of the D3 switch/shift lock solenoid/park pin switch connector (B).
4. Remove the terminal from the. connector by pushing the lock tab (C) up in the connector using a thin blade screwdriver (D). Remove all six
terminals and replace the connector.