S2000 L4-1997cc 2.0L DOHC (VTEC) MFI (2001)
Fuel Door Release Cable: Service and Repair
Fuel Fill Door Opener Cable Replacement
NOTE:
-
Put on gloves to protect your hands.
-
Take care not to scratch the body and related parts.
-
Take care not to kink the cable.
1. Remove these items:
-
Rear side trim
-
Rear tray
-
Trunk side trim panel, left side
2. Remove the fuel fill door opener knob (A) from the fuel fill door opener bracket (B) by turning it 90 degrees, and remove the fuel fill door latch
(C) from the body in the same way.
3. Remove the fuel fill door opener cable (D).
4. Install the cable in the reverse order of removal with a new piece of cable cushion tape (E).