S2000 L4-1997cc 2.0L DOHC (VTEC) MFI (2001)
_mfi/Page-1884001.png)
Power Door Lock Actuator: Testing and Inspection
Driver's Door Lock Actuator Test
Driver's Door Lock Actuator Test
1. Remove the driver's door panel.
2. Disconnect the 2P connector (A) from the actuator (B).
3. Check actuator operation by connecting power and ground according to the table. To prevent damage to the actuator, apply battery voltage only
momentarily.
4. If the actuator does not operate as specified, replace the door lock actuator assembly.
