S2000 L4-1997cc 2.0L DOHC (VTEC) MFI (2001)
Parking Brake Cable: Service and Repair
Parking Brake Cable Replacement
NOTE:
-
The parking brake cables must not be bent or distorted. This will lead to stiff operation and premature failure.
-
Refer to the Exploded View as needed during this procedure.
1. Remove the caliper shield.
2. Release the parking brake lever fully, and remove the brake hose clip (A) from the parking brake cable (B).
3. Disconnect the parking brake cable end from the parking brake arm (C).