S2000 L4-1997cc 2.0L DOHC (VTEC) MFI (2001)
_mfi/Page-481002.png)
9. With the specified air pressure applied and the piston at TDC, move the secondary rocker arm (A). The mid rocker arm (B), primary rocker arm
(C) and secondary rocker arm should move together. If the three rocker arms do not move together, replace the rocker arms as a set.
10. Remove the special tools.
11. Tighten the camshaft holder bolts to 22 Nm (2.2 kgf-m, 16 ft. lbs.).
12. Install the cylinder head cover.
