S2000 L4-1997cc 2.0L DOHC (VTEC) MFI (2001)
5.
Reinstall the screw, and let the adhesive cure for 20 minutes.
6.
Spread a generous amount of silicone paste on the foam seal of the blower/evaporator unit opening.
7.
Carefully reinstall the blower/evaporator unit, making sure to get a tight seal with the paste on the foam seal.
8.
Evacuate and recharge the A/C system (see pages 21-55 and 21-56 of the service manual).
9.
Start the engine, and run the A/C to make sure it works properly.
Disclaimer