S2000 L4-1997cc 2.0L DOHC (VTEC) MFI (2001)
_mfi/Page-2235001.png)
Spot Lamp: Testing and Inspection
Ceiling/Spotlight Test
1. Turn the ceiling/spotlights switch OFF.
2. Pry off the lens (A).
3. Remove the two screws and the ceiling/spotlight housing.
4. Disconnect the 4P connector (B) from the housing (C).
5. Check for continuity between the terminals in each switch position according to the table.
6. If the continuity is not as specified, replace the bulbs or the light.
