S2000 L4-1997cc 2.0L DOHC (VTEC) MFI (2001)
_mfi/Page-1657002.png)
2. Remove the access panel (A) from the steering wheel, then disconnect the driver's airbag 2P connector (B) from the cable reel.
3. Remove the cover (A) from the steering wheel, remove the two Torx bolts (B) using a Torx T30 bit, then remove the driver's airbag (C).
4. Disconnect the horn connector from the steering wheel.
Installation
1. Place the new driver's airbag (A) in the steering wheel, and secure it with new Torx bolts (B). Install the covers (C).
