S2000 L4-1997cc 2.0L DOHC (VTEC) MFI (2001)
22. Press the wheel bearing (A) out of the knuckle (B) using the special tools and a press.
23. Press the wheel bearing inner race (A) out of the hub (B) using a commercially available bearing separator (C) and a press.
24. Wash the knuckle and hub thoroughly in high flash point solvent before reassembly.
25. Press a new wheel bearing (A) into the knuckle (B) using the old bearing (C), a steel plate (D), the special tool, and a press. Place the wheel
bearing on the knuckle with the pack seal side (metal color) facing inside. Be careful not to damage the sleeve of the pack seal.