S2000 L4-1997cc 2.0L DOHC (VTEC) MFI (2001)
_mfi/Page-1173001.png)
Countershaft: Specifications
Countershaft
Diameter of rear side cover needle bearing contact area
Standard or new
30.020 - 30.029 mm
Service limit
29.97 mm
Diameter of transmission housing side needle bearing contact
Standard or new
34.002 - 34.018 mm
area
Service limit
33.95 mm
Diameter of 2nd gear contact area
Standard or new
43.984 - 44.000 mm
Service limit
43.93 mm
Diameter of clutch housing side ball bearing contact area
Standard or new
28.002 - 28.015 mm
Service limit
27.95 mm
Runout
Standard or new
0.02 mm Maximum
Service limit
0.05 mm
Countershaft 1st gear
I.D
Standard or new
57.010 - 57.029 mm
Thickness
Standard or new
31.18 - 31.26 mm
Service limit
31.06 mm
End play
Standard or new
0.04 - 0.22 mm
Service limit
0.3 mm
Countershaft 1st gear distance collar
O.D.
Standard or new
50.987 - 51.000 mm
Length
Standard or new
28.03 - 28.08 mm
Countershaft 2nd gear
I.D.
Standard or new
43.984 - 44.000 mm
Thickness
Standard or new
32.88 - 32.96 mm
Service limit
32.76 mm
End play
Standard or new
0.04 - 0.17 mm
Service limit
0.3 mm
Countershaft reverse gear
I.D.
Standard or new
50.009 - 50.025 mm
Thickness
Standard or new
26.38 - 26.46 mm
Service limit
26.26 mm
End play
Standard or new
0.4 - 0.22 mm
Service limit
0.3 mm
Countershaft reverse gear distance collar O.D.
Standard or new
37.989 - 38.000 mm
Length
Standard or new
25.53 - 25.58 mm
