S2000 L4-1997cc 2.0L DOHC (VTEC) MFI (2001)
5. With the master switch still disconnected, make these input tests at the 14P connector.
-
If any test indicates a problem, find and correct the cause, then recheck the system.
-
If all the input tests prove OK, go to step 6.
6. Reconnect the master switch, and perform the following input tests.
-
If any test indicates a problem, find and correct the cause, then recheck the system.
-
If all the input tests prove OK, go to step 7.
7. If all the input tests prove OK, the power window master switch must be faulty; replace it.