S2000 L4-2.2L (2004)
Brake Pad: Testing and Inspection
Rear
Rear Brake Pad Inspection and Replacement
1. Raise the rear of the vehicle, and support it with safety stands in the proper location. Remove the rear wheel.
2. Release the parking brake.
3. Hold the caliper pin (A) with a wrench, being careful not to damage the pin boot. Remove the two caliper bolts (B) with another wrench and
caliper (C) from the bracket. Thoroughly clean the outside of the caliper to prevent dust and dirt from entering inside. Support the caliper with a
piece of wire so it does not hang from the brake hose.
4. Remove the pad shims (A) and brake pads (B).