S2000 L4-2.2L (2004)
Cruise Control Switch: Testing and Inspection
Main Switch
Cruise Control Main Switch Test
1. Carefully pry the cruise control main switch out of the instrument panel, then disconnect the connector from the switch.
2. Check for continuity between terminals No.6 and No.1, and between terminals No.6 and No.5 on the switch. There should be continuity when the
switch is pressed, and no continuity when the switch is pressed again.
3. Check for continuity between the No.2 and No.3 terminals. There should be continuity.
4. If a failure occurs between terminals No.6 and No.1, replace the cruise control main switch.
5. If a failure occurs between terminals No.6 and No.5, and between the No.2 and No.3, check the cruise control main switch indicator and
illumination.
