S2000 L4-2.2L (2004)
-
If the camshaft-to-holder clearance is within limits, go to step 10
-
If the camshaft-to-holder clearance is beyond the service limit and the camshaft has been replaced, replace the cylinder head.
-
If the camshaft-to-holder clearance is beyond the service limit and the camshaft has not been replaced, go to step 9.
Camshaft-to-Holder Oil Clearance:
Standard (New): 0.060 - 0.099 mm (0.002 - 0.004 inch)
Service Limit: 0.15 mm (0.006 inch)
9. Check the total runout with the camshaft supported on V-blocks.
-
If the total runout of the camshaft is within the service limit, replace the cylinder head.
-
If the total runout is beyond the service limit, replace the camshaft and recheck the camshaft-to-holder oil clearance. If the oil clearance is still
out of tolerance, replace the cylinder head.
Camshaft Total Runout:
Standard (New): 0.03 mm (0.001 inch) max.
Service Limit: 0.04 mm (0.002 inch)
10. Measure cam lobe height.
Cam Lobe Height Standard (New):
