S2000 L4-2.2L (2004)
Air Door Actuator / Motor: Service and Repair
Recirculation Control Motor
Recirculation Control Motor Replacement
1. Remove the passenger's dashboard lower cover.
2. Remove the passenger's airbag.
3. Remove the convertible top control unit.
4. Disconnect the dashboard wire harness B connectors C201, C202, C203, and C451.
5. Disconnect the 7P connector (A) from the recirculation control motor (B). Remove the self-tapping screws and the recirculation control motor
from the blower unit.
6. Install the motor in the reverse order of removal. Make sure the pin on the motor is properly engaged with the linkage. After installation, make
sure the motor runs smoothly.
