S2000 L4-2.2L (2004)
Dimmer Switch: Testing and Inspection
Dash Lights Brightness Controller
Controller Input Test
1. Remove the gauge assembly
2. Inspect the gauge assembly connector A (22P) terminals to be sure they are all making good contact.
-
If the terminals are bent, loose, or corroded, repair them as necessary, and recheck the system.
-
If the terminals look OK, go to step 3.
3. Reconnect the connectors to the gauge assembly.
4. Back probe the connector and make these input tests.
-
If any test indicates a problem, find and correct the cause, then recheck the system.