S2000 L4-2.2L (2004)
Auxiliary Power Outlet: Testing and Inspection
Accessory Power Socket Test/Replacement
Accessory Power Socket Test/Replacement
1. Remove the rear console.
2. Disconnect the 2P connector.
3. Inspect the connector terminals to be sure they are all making good contact.
-
If the terminals are bent, loose or corroded, repair them as necessary, and recheck the system.
-
If the terminals look OK, go to step 4.
4. Turn the ignition switch ACC (I), and check for voltage between the No.1 and No.2 terminals.
-
There should be battery voltage.
-
If there is no battery voltage, check for:
-
blown No.9 (10 A) fuse in the under-dash fuse/relay box
-
faulty accessory power socket relay
-
poor ground (G401, G601)
-
an open in the wire
5. Remove the housing and socket.
