S2000 L4-2.2L (2004)
Control Arm: Service and Repair
Rear Suspension
Upper Arm
Upper Arm Removal/Installation
Special Tools Required
Ball joint remover, 28 mm 07MAC-SL00200
1. Raise the rear of the vehicle, and support it with safety stands in the proper locations. Remove the rear wheels.
2. Remove the flange bolts (A) and the wheel sensor harness (B) from the upper arm (C).
3. Remove the lock pin (A) from the upper arm ball joint, and remove the castle nut (B).
4. Remove the upper arm ball joint from the knuckle using the special tool.
