S2000 L4-2.2L (2004)
Reassembly
1. Assemble all of the damper components except the self-locking nut onto the damper unit. Align the spring bottom end (A), the stepped part of the
lower spring mounting cushion, and the step on the lower spring seat (B).
2. Install the damper assembly on a commercially available strut spring compressor (C).
3. Position the stud bolt (A) in the damper mounting base as shown.
4. Compress the damper spring with the spring compressor.
5. Install a new self-locking nut (A) on the damper shaft.
6. Hold the damper shaft with a hex wrench (B), and tighten the self-locking nut to the specified torque.
Installation
