S2000 L4-2.2L (2004)
Drive/Propeller Shaft: Testing and Inspection
Inspection
1. Shift into neutral position.
2. Raise the vehicle off the ground, and support it with safety stands in the proper locations.
3. Check the universal joint boots for damage and deterioration. If the boots are damaged or deteriorated, replace the propeller shaft.
4. Check the joints for excessive play or rattle. If the universal joints have excessive play or rattle, replace the propeller shaft.
5. Install a dial indicator (A) with its needle on the center of the propeller shaft (B).
6. Turn the propeller shaft slowly, and check the runout. If the runout exceeds the service limit, replace the propeller shaft.
Runout:
Service Limit: 1.5 mm (0.06 inch)
