S2000 L4-2.2L (2004)
Power Window Switch: Testing and Inspection
Master Switch Input Test
Master Switch Input Test
1. Remove the door panel.
2. Remove the power window master switch (A) from the door panel.
3. Disconnect the 14P connector (B) and the 10P connector (C) from the power window master switch.
4. Inspect the connectors and socket terminals to be sure they are all making good contact.
-
If the terminals are bent, loose or corroded, repair them as necessary, and recheck the system.
-
If the terminals look OK, go to step 5.
