H2 V8-6.0L (2004)
6. Install the transmission bolt and stud on the right side until snug.
NOTE: Refer to Fastener Notice in Service Precautions.
7. Install the bottom bolt on the left side until snug.
Tighten
7.1.
Tighten the oil pan and oil pan-to-oil pan front cover bolts to 25 N.m (18 lb ft).
7.2.
Tighten the oil pan-to-rear core bolts to 12 N.m(106 lb in).
7.3.
Tighten the bellhousing, converter cover, and transmission bolts/stud to 50 N.m (37 lb ft).