H2 V8-6.0L (2004)
4. Connect the I/P module yellow 2-way connector (1) located behind the I/P support.
5. Install the CPA to the I/P module yellow 2-way connector (1).
6. Install the SIR Fuse to the underhood fuse block.
7. Staying well away from all air bags, turn ON the ignition, with the engine OFF.
7.1. The AIR BAG indicator will flash 7 times.
7.2. The AIR BAG indicator will then turn OFF.
8. Perform the Diagnostic System Check - SIR if the AIR BAG indicator does not operate as described.
