H2 V8-6.2L (2008)
2. Install the retainer and bolt to the antenna.
Tighten the bolt to 9 N.m (80 lb in).
3. Connect the electrical connector to the antenna.
4. Position the headliner back to the roof. Refer to Headlining Trim Panel Replacement (SUT) (See: Body and Frame/Interior Moulding /
Trim/Headliner/Service and Repair/Headlining Trim Panel Replacement (SUT))Headlining Trim Panel Replacement (SUV) (See: Body and
Frame/Interior Moulding / Trim/Headliner/Service and Repair/Headlining Trim Panel Replacement (SUV)) .
5. Install the sunshade to the headliner. Refer to Sunshade Replacement (See: Body and Frame/Interior Moulding / Trim/Sun Visor/Service and
Repair/Sunshade Replacement) .
6. Install the windshield side garnish molding. Refer to Windshield Side Garnish Molding Replacement (See: Body and Frame/Interior Moulding /
Trim/Trim Panel/Service and Repair/Windshield Side Garnish Molding Replacement) .
7. Install the center pillar upper garnish molding. Refer to Center Pillar Upper Garnish Molding Replacement (See: Body and Frame/Interior
Moulding / Trim/Trim Panel/Service and Repair/Center Pillar Upper Garnish Molding Replacement) .
