H2 V8-6.2L (2008)
Global Positioning System: All Technical Service Bulletins
OnStar(R) - Incorrect Number Assigned to Vehicle
Bulletin No.: 05-08-46-004B
Date: January 08, 2008
INFORMATION
Subject:
OnStar(R) Phone Number Concerns (Phone Number Incorrect/Assigned to Another Vehicle/Phone) That Occur During Diagnosis of OnStar(R) System
Models:
2000-2008 GM Passenger Cars and Trucks
2003-2008 HUMMER H2
2006-2008 HUMMER H3
2003-2008 Saturn Vehicles
2005-2008 Saab 9-7X
with OnStar(R) (RPO-UE1)
Supercede:
This bulletin is being revised to add the 2008 model year. Please discard Corporate Bulletin Number 05-08-46-004A (Section 08 - Body and
Accessories).
During diagnosis of an OnStar(R) concern the technician may be told that the OnStar(R) phone number is incorrect or tied to another vehicle and/or
phone of some kind. To resolve these concerns the Tech 2(R) with software version 22.005 (or higher) has the capability to change the OnStar(R) phone
number.
Service Procedure
With the Tech 2(R) build the vehicle to specifications within the Diagnostics area of the Tech 2(R).
For vehicles with physical-based diagnostics - under Body go to the OnStar(R) section. Then select the Special Functions menu. For vehicles with
functional-based diagnostics - under Body and Accessories go to the Cellular Communication section. Select Module Setup and then Vehicle
Communication Interface Module.
Locate the Program Phone Number prompt and select it. The original phone number will be displayed on the Tech 2(R) screen.
Contact the OnStar(R) team at the GM Technical Assistance Center (TAC) to obtain a new phone number.
Highlight the digits of the phone number one at a time and enter the new phone number using the number keys on the Tech 2(R).
Press the Soft key at the base of the screen for Done once these numbers have been changed on the screen.
Press the Soft key for Done again. The area code or new phone number has now been programmed into the phone.
Cycle the ignition to Off and open the drivers door.
Press the blue OnStar(R) button to make sure that a normal connection can be made to the OnStar(R) call center. If applicable make sure the Hands-Free
Calling (HFC) works properly by making a phone call.
If the system is working properly fax or voicemail a case closing into the OnStar(R) team at TAC with the results. Dealers in Canada should submit case
closing information through the GM infoNET.
Please follow this diagnostic process thoroughly and complete each step. If the condition exhibited is resolved WITHOUT completing every step the
remaining steps do not need to be performed. If the procedure above does not resolve the condition you must contact TAC for further assistance. This
diagnostic approach was developed specifically for this condition and should not automatically be used for other vehicles with similar symptoms.
Warranty Information (excluding Saab U.S. Models)
