H2 V8-6.2L (2008)
Sunroof / Moonroof Panel: Adjustments
Sunroof Window Height and Opening Fit Adjustment
1. In order to adjust the glass height, the sunroof glass must be in the zero, closed, position.
Important: Do not remove the screws from the sunroof mechanism.
2. Loosen the 4 adjustment screws.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
3. Adjust the rear glass panel (1) so that it is flush with the roof panel (3), 0-2.0 mm (0.079 in) above 3.
Tighten all 4 adjustment screws to 4 N.m (35 lb in).
4. Adjust the front glass panel (2) so that it is flush with the roof panel (3), 0-1.0 mm (0.040 in) below 3.
Tighten all 4 adjustment screws to 4 N.m (35 lb in).
