H2 V8-6.2L (2008)
Tailgate Striker: Service and Repair
Endgate Lock Striker Replacement
Removal Procedure
1. Open the spare tire carrier.
2. Open the endgate.
3. Remove the striker bolt.
Installation Procedure
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
1. Install the striker bolt.
Tighten the striker bolt to 25 N.m (18 lb ft).
2. Close the endgate and verify the latch operation and reopen.
3. Close the endgate.
4. Latch and secure the spare tire carrier.
